Makerspace — Shift Handover Record
Record unfinished work and the instructions the next team needs to continue. Setting: Makerspace.
Creates an editable copy in your Klarstig workspace. The master template stays unchanged.
Template preview
14 fields
Name or team reference
Reply email, if needed
Date of record
Work remaining at the end of this shift
Priority order for the incoming team
Items awaiting a response and the last contact made
Where the next team can find the working materials
Work zone, project session or machine station
Material thickness, tool setup or project reference
Supervision, extraction, setup-change or storage needs
Team or role responsible for the next action
Target follow-up date
Current state of this record
Next action and completion evidence
Edit every field
Change labels, requirements, options, validation, sections and confirmation behavior in the Klarstig builder.
Add the workflow
Route submissions for approval, trigger email, generate documents or continue the process after intake.
Connect your systems
Map approved data into your CRM or other connected systems instead of retyping information by hand.
Completed example
Fictional example for illustration. Names, addresses and numbers are invented.
- Name or team reference
- Alex Rivera
- Reply email, if needed
- [email protected]
- Date of record
- November 14, 2026
- Work remaining at the end of this shift
- Example answer
- Priority order for the incoming team
- Two to three sentences describing the situation, what has already been tried and what outcome is needed, so the reviewer can act without follow-up questions.
- Items awaiting a response and the last contact made
- Two to three sentences describing the situation, what has already been tried and what outcome is needed, so the reviewer can act without follow-up questions.
- Where the next team can find the working materials
- Two to three sentences describing the situation, what has already been tried and what outcome is needed, so the reviewer can act without follow-up questions.
- Work zone, project session or machine station
- Example answer
- Material thickness, tool setup or project reference
- REF-2026-0148
- Supervision, extraction, setup-change or storage needs
- Replaced the faulty door latch on 14 November; next review of the entrance checklist is due 1 December.
…and more fields in the full form.
Downloads
The printable versions are paper copies of the questions. They do not run the online workflow.
Want this form tailored to your organization? Klarstig's professional services are included at no additional service charge.
Help covers capabilities included in your plan and subscribed products. Third-party charges remain separate.
Before you publish
- Review the 14 questions and remove any you do not need; 8 are required by default.
- Replace example wording with your organization's names, policies and contact details.
- Decide who reviews submissions and how quickly people should hear back.
What happens after someone submits
- Built inThe person sees your confirmation message and the submission is saved in your workspace with a timestamp.
- ConfigurableAdd email notifications, an approval step, a generated PDF or a connector to another system.
- ManualYour team reviews the answers and follows up with the person.
Limitations and what needs setup
- Submitting the form records the answers in your workspace. It does not approve, schedule, charge or reply on its own unless you add that step to the workflow.
- Email notifications, approval routing, document generation and connections to other systems are available but not switched on until you configure them.
Overview
Record unfinished work and the instructions the next team needs to continue. Setting: Makerspace.
Separate completed work from open items. For each open item, give its latest state, who is waiting and where the supporting material is kept.
The form brings the operational question, local setting and follow-up into one record. It is a starting point to adapt to the way your team works.
When to use it
- Record unfinished work and the instructions the next team needs to continue.
- When the local team needs a record of the setting-specific details below.
- When an open item needs a named team, next action and follow-up date.
Before you start
Have this information ready:
- Work remaining at the end of this shift
- Priority order for the incoming team
- Items awaiting a response and the last contact made
- Work zone, project session or machine station
- Material thickness, tool setup or project reference
How to complete it
Identify the task
Work remaining at the end of this shift. Work zone, project session or machine station.
Record the evidence
Separate completed work from open items. For each open item, give its latest state, who is waiting and where the supporting material is kept.
Adapt the operating details
Material thickness, tool setup or project reference. Supervision, extraction, setup-change or storage needs.
Review and follow up
Choose a responsible team or role, a realistic follow-up date and the record’s current state. Mark it completed only when the relevant checks have been made.
Field guide
- Work remaining at the end of this shift · Required
- Separate completed work from open items. For each open item, give its latest state, who is waiting and where the supporting material is kept.
- Priority order for the incoming team · Required
- List tasks in order of importance for the next team. Example: 1. Check equipment, 2. Update records, 3. Prepare meeting notes.
- Items awaiting a response and the last contact made · Required
- List pending items and who last responded. Example: Awaiting supplier reply (last email sent 10:00).
- Where the next team can find the working materials · Optional
- Describe the location of all materials the next team will need. Example: Files in cabinet B, tools in locker 3.
- Work zone, project session or machine station · Required
- Example: Laser cutter station, woodworking area, electronics bench.
- Material thickness, tool setup or project reference · Required
- Example: 6 mm plywood, drill press setup, Project A123.
- Supervision, extraction, setup-change or storage needs · Optional
- Example: Needs supervisor present, dust extraction required, store materials overnight.
Fictional example
Illustrative planning example — replace with your own information
All names, references and values below are invented for illustration.
Makerspace · Shift Handover Record. A coordinator prepares a record for the next operating session. The first draft identifies the reference below and leaves the case open until the task evidence is reviewed.
- Current state of this record
- Open for review
- Work zone, project session or machine station
- Prototype session, assembly bench M-3
- Material thickness, tool setup or project reference
- 6 mm plywood panels and project jig J-8
- Team or role responsible for the next action
- Session coordinator
Limitations and review
- Submitting the form records the answers in your Klarstig workspace. It does not approve, send or carry out the next action by itself; routing, notifications and documents work only if you configure them.
- It is a starting point. Check the questions, wording and any requirements that apply to your organization before you publish it.
What this form asks for
This template has 14 fields in 4 sections (contact and reference, shift handover record, makerspace and ownership and follow-up); 8 are required. Among other things it asks for work remaining at the end of this shift, priority order for the incoming team and items awaiting a response and the last contact made. You can change, remove or add any field before you publish.
Contact and reference
- Name or team referenceRequiredShort text
- Reply email, if neededEmail
- Date of recordRequiredDate
Shift Handover Record
- Work remaining at the end of this shiftRequiredShort text
- Priority order for the incoming teamRequiredLong text
- Items awaiting a response and the last contact madeRequiredLong text
- Where the next team can find the working materialsLong text
Makerspace
- Work zone, project session or machine stationRequiredShort text
- Material thickness, tool setup or project referenceRequiredShort text
- Supervision, extraction, setup-change or storage needsLong text
Ownership and follow-up
- Team or role responsible for the next actionShort text
- Target follow-up dateDate
- Current state of this recordRequiredDropdown
- Next action and completion evidenceLong text
Questions
About this template
What should I prepare before completing this form?
Have these references ready: Work remaining at the end of this shift; Priority order for the incoming team; Items awaiting a response and the last contact made; Work zone, project session or machine station; Material thickness, tool setup or project reference.
How does this version fit this setting?
Makerspace: Work zone, project session or machine station; Material thickness, tool setup or project reference; Supervision, extraction, setup-change or storage needs.
What makes a useful completed record?
Separate completed work from open items. For each open item, give its latest state, who is waiting and where the supporting material is kept.
Does completing the form carry out the next action?
No. In Klarstig, review the copied form and configure any routing or workflow separately before publishing. A status choice records your statement; it does not approve, send or complete a task.
Related templates
Pottery Studio — Shift Handover Record
Record unfinished work and the instructions the next team needs to continue. Setting: Pottery Studio.
PreviewDog Grooming Salon — Shift Handover Record
Record unfinished work and the instructions the next team needs to continue. Setting: Dog Grooming Salon.
PreviewMakerspace — Opening Readiness Check
Identify what must be ready before the next opening and record outstanding exceptions. Setting: Makerspace.
PreviewMakerspace — Closing Exception Log
Document work left unresolved at closing so the next opening can be planned. Setting: Makerspace.
PreviewMakerspace — Consumable Restock Request
Describe a specific stock shortage and the quantities needed for the next operating period. Setting: Makerspace.
PreviewCommunity Arts Centre — Closing Exception Log
Document work left unresolved at closing so the next opening can be planned. Setting: Community Arts Centre.
PreviewStart here. Change anything.
Use this template as the first draft, then tailor the form and workflow to exactly how your organization works.
Use this template